Abstract:MAA-72 well experienced a decrease in production rate, Pump IND1300 42 hz / pump ROR of 960- 1640 bfpd. Well production is Qgross 599.97 bfpd. The required data obtained are general report electrical submersible pump, reservoir…
servoir data, fluid properties data, production data and wellprofile data, data obtained directly from the computer in the field. In data processing, the method is to determine the potential analysis of the well, evaluate the installed pump, and optimize the well with a new pump. Optimum results of 1498.55 bfpd, Gf 0.435 Psi/ft, IND1300 pump evaluation, namely PIP 170.37 Psi, TDH 1782.27 ft, PSD 1969.42 ft, number of stages 200 stages, EP 49% and Hp 33.5. Optimization was carried out by replacing the pump. New pump selection DN1800/60 Hz / ROR 1200-2400 bfpd, head/stage 22 ft, Hp 0.34 EP 70%. Determination of new pump PSD 2022.94 ft, PIP 43.5 Psi, TDH 2212.32 ft, number of stages 22 stages. Increase in Qact production rate (599.97 bfpd) to (1498.55 bfpd) with a rate increase of 898.58 bfpd.
Abstract:Abstract: This research discusses the design and development of a plant-watering robot at a 1:30 scale controlled via an Android application and an embedded system based on an Arduino microcontroller. The purpose of this…
study is to produce an automatic plant-watering robot that is efficient, energy-saving, and easy to operate to support agricultural automation. The research method used is Research and Development (R&D), which includes stages of requirement identification, design, construction, testing, and system evaluation. The main components used include an Arduino Uno, HC-05 Bluetooth module, L298N motor driver, HC-SR04 ultrasonic sensor, 12V DC water pump, and a 25W solar panel as an alternative power source. The test results show that the robot can operate automatically with a success rate of 90%, battery endurance of approximately 1 hour and 13 minutes, charging time of about 5 hours and 38 minutes, and the water pump operates effectively for up to 5 hours. The integration of Android control, embedded systems, and solar power makes this robot an innovative solution for environmentally friendly and efficient agricultural automation.
Keywords: plant-watering robot; Android; embedded system; Arduino; solar panel
Abstrak: Penelitian ini membahas perancangan dan pengembangan robot penyiram tanaman skala 1:30 yang dikendalikan melalui aplikasi Android dan sistem embedded berbasis mikrokontroler Arduino. Tujuan penelitian ini adalah menghasilkan robot penyiram tanaman otomatis yang efisien, hemat energi, dan mudah dioperasikan untuk mendukung otomasi pertanian. Metode yang digunakan adalah Research and Development (R&D) dengan tahapan identifikasi kebutuhan, perancangan, pembuatan, pengujian, dan evaluasi sistem. Komponen utama yang digunakan meliputi Arduino Uno, modul Bluetooth HC-05, driver motor L298N, sensor ultrasonik HC-SR04, pompa air DC, dan panel surya 25 W sebagai sumber energi alternatif. Hasil pengujian menunjukkan bahwa robot mampu beroperasi secara otomatis dengan tingkat keberhasilan 90%, ketahanan baterai selama ±1 jam 13 menit, lama pengisian daya sekitar 5 jam 38 menit, serta pompa air bekerja efektif hingga 5 jam. Integrasi antara kendali Android, sistem embedded, dan tenaga surya menjadikan robot ini solusi inovatif untuk otomatisasi penyiraman tanaman yang ramah lingkungan dan berpotensi diterapkan pada lahan pertanian sesungguhnya.
Kata kunci: robot penyiram tanaman; Android; embedded system; arduino; panel surya
Abstract:Abstract : A mosque is a building used by Muslims to get closer to the creator by worshiping and observing Islamic law. Efficient water management in mosques is essential to support the sustainability and efficiency of natural…
atural resources. This study proposes an automatic water reservoir filling system in mosques using microcontroller technology. The fuzzy method is useful in filling automatic water reservoirs with microcontroller technology as an optimization and regulating the water filling process automatically. This system is to automate the process of filling water reservoirs by utilizing intelligent water level sensors and microcontrollers. In this research, I created a system that is able to detect the water level in the reservoir and regulate the filling process automatically. The use of a water level sensor allows accurate measurement of the water level, while the microcontroller controls the water pump according to the detected needs. The test results show that the implementation of microcontroller technology in filling automatic water reservoirs in mosques can increase water use efficiency and reduce waste. The system provides an effective and environmentally friendly solution for managing the mosque's water needs, contributing significantly to water conservation and maintenance of natural resources.
Keywords : water reservoir; mosque; microcontroller; fuzzy method; water level sensor
Abstrak : Masjid adalah sebuah bangunan yang digunakan umat muslim untuk mendekatkan diri kepada sang pencipta dengan beribadah dan menjalankan syariat agama Islam. Pengelohan air yang efisien di masjid sangat penting untuk mendukung keberlanjutan dan efisiensi sumber daya alam. Penelitian ini mengusulkan sebuah sistem pengisian tandon air otomatis di masjid menggunakan teknologi microcontroller. Metode fuzzy berguna dalam pengisian tandon air otomatis dengan teknologi microcontroller sebagai pengoptimalkan dan mengatur proses pengisian air dengan secara otomatis. Sistem ini untuk mengotomatiskan proses pengisian tandon air dengan memanfaatkan sensor water level dan microcontroller yang cerdas. Dalam penelitian ini, dibuat sistem yang mampu mendeteksi tingkat air dalam tandon dan mengatur proses pengisian secara otomatis. Penggunaan sensor water level memungkinkan pengukuran yang akurat terhadap tingkat air, sementara microcontroller mengontrol pompa air sesuai dengan kebutuhan yang terdeteksi. Hasil pengujian menunjukkan bahwa implementasi teknologi microcontroller dalam pengisian tandon air otomatis di masjid dapat meningkatkan efisiensi penggunaan air dan mengurangi pemborosan. Sistem ini memberikan solusi yang efektif dan ramah lingkungan untuk mengelola kebutuhan air masjid, memberikan kontribusi signifikan terhadap konservasi air dan pemeliharaan sumber daya alam.
Kata kunci: tandon air; masjid; microcontroller; metode fuzzy; sensor water level
Abstract:Abstract: Disposal of water in traditional boats is currently still done manually with human intervention, in contrast to commercial ships that already have a ballast system. This will certainly be a problem for boat users…
rs who can interfere with their sailing. Therefore, in this study, a design for an automatic water pump on an Arduino Uno-based boat will be made, which functions as a tool to remove puddles in the hull of the boat due to leakage. This tool is able to discharge water on the boat automatically when the water level entering the hull of the boat has exceeded the maximum height limit until the water level is within the tolerance limit which is considered safe and does not interfere with sailing. This tool works automatically using the WLC sensor (water level control) as a tool to monitor the water level, and the Arduino Uno system as a component to run the program by switching the pump. This tool can minimize the occurrence of shipwreck accidents due to boat hull leaks and human error. This system is still applied in the form of a prototype.
Keywords: Arduino Uno; water level control; boat.
Abstrak: Pembuangan air pada kapal tradisional saat ini masih dilakukan dengan cara manual dengan adanya campur tangan manusia, berbeda dengan kapal-kapal komersil yang sudah memiliki sistem ballast. Hal ini tentunya akan menjadi permasalahan bagi para pengguna kapal yang dapat mengganggu pelayaran mereka. Oleh karena itu, dalam penelitian ini akan dibuat suatu perancangan pompa air otomatis pada kapal berbasis Arduino Uno, yang berfungsi sebagai alat untuk membuang genangan air dalam lambung kapal akibat kebocoran. Alat ini mampu melakukan pembuangan air pada kapal secara otomatis pada saat ketinggian air yang masuk kedalam lambung kapal telah melampaui batas ketinggian maksimal sampai ketinggian air tersebut berada pada batas toleransi yang dianggap aman dan tidak mengganggu pelayaran. Alat ini bekerja dengan otomatis menggunakan sensor WLC (water level control) sebagai alat untuk memantau ketinggian airnya, dan sistem Arduino Uno sebagai komponen untuk menjalankan program dengan melakukan switching pada pompa. Alat ini dapat meminimalisir terjadinya kecelakaan kapal karam akibat kebocoran lambung kapal dan human error. Sistem ini masih diterapkan dalam bentuk prototype..
Kata kunci: Arduino Uno; water level control; kapal.
Abstract:Abstract: Nowadays, almost all of them use a dispenser, because of its practicality. But behind that there are several things that make the dispenser less efficient when taking drinking water from the glass, because the…
user has to press or turn the water tap in the dispenser. The working system of this tool is where the machine will run according to the commands obtained from the laser diode and the LDR sensor, the laser diode will reflect light that leads to the LDR. when the light reflected by the laser diode to the LDR is cut, it can be interpreted that the LDR and the laser diode detect or read the presence of an object in the form of a glass, automatically the two sensors instruct the controller to activate the water pump and the water pump will work to remove the water which will be filled in the glass that is placed in the dispenser with the volume of the glass used, the filling process and the end of filling will be displayed by the LCD and when filling the water the glass is full there will be a warning from the buzzer in the form of a sound. Users no longer need to press or turn the water tap when taking water from the dispenser using a glass.
Keywords: Dispensers;LDR Sensor;Diode Laser and Tools
Abstrak: Pada saat ini masyarakat sekarang sudah hampir semuanya menggunakan dispenser, karena kepraktisan. Namun dibalik itu semua ada beberapa hal yang membuat dispenser kurang efisien saat mengambil air minum pada gelas, karena pengguna harus menekan atau memutar keran air yang ada pada dispenser. Sistem kerja dari alat ini ialah dimana mesin akan berjalan sesuai dengan perintah yang didapat dari Dioda laser dan sensor LDR, Dioda laser akan memantulkan cahaya yang mengarah pada LDR, pada saat cahaya yang dipantulkan Dioda laser ke LDR terpotong maka dapat diartikan LDR dan Dioda laser mendeteksi atau membaca adanya benda berupa gelas, secara otomatis kedua sensor tersebut memerintahkan controller mengaktifkan pompa air dan pompa air akan bekerja mengeluarkan air yang akan diisikan pada gelas yang diletakkan pada dispenser dengan volume gelas yang digunakan, proses pengisian dan akhir pengisian akan ditampilkan oleh LCD dan saat pengisian air pada gelas penuh akan ada peringatan dari buzzer berupa bunyi. Pengguna tidak perlu lagi menekan atau memutar keran air saat mengambil air pada dispenser menggunakan gelas.
Kata Kunci : Dispenser;Sensor LDR;Dioda Laser dan Alat
Abstract:Hydroponic farming is gaining popularity in urban areas due to its efficient resource usage and high, clean yields. However, systems like the Nutrient Film Technique (NFT) rely on electric pumps for continuous nutrient circulation,…
irculation, making them vulnerable to extended power outages that can disrupt plant nutrition and lead to crop failure. The purpose of this activity is to address the issue of power outages that impacted the hydroponic gardens of the Women Farmers Group (KWT) Sepinggan Raya, Balikpapan, by implementing a solar-powered water pump and a water quality monitoring system. The program consisted of an initial survey, system development and installation, and training sessions on system operation and maintenance. Results indicate that the implementation of the solar pump and monitoring system improves hydroponic productivity while reducing operational costs previously dependent on the national electricity grid. Additionally, the project empowered the local women's group with renewable energy knowledge and modern farming technologies, promoting sustainable urban agriculture practices.
Keywords: application of technologies; hydroponic; renewable energy; urban farming; water quality monitoring
Abstrak: Pertanian hidroponik semakin populer di area perkotaan yang memiliki keterbatasan ruang karena efisiensi sumber daya dan hasil panen yang tinggi. Namun, sistem hidroponik seperti Nutrient Film Technique (NFT) sangat bergantung pada pompa listrik untuk sirkulasi air nutrisi secara berkelanjutan. Pemadaman listrik yang berkepanjangan dapat mengganggu suplai nutrisi dan berpotensi menyebabkan kegagalan panen. Kegiatan ini bertujuan untuk mengatasi permasalahan padamnya listrik yang terjadi di kebun hidroponik Kelompok Wanita Tani (KWT) Sepinggan Raya, Balikpapan dengan menerapkan pompa air tenaga surya dan sistem pemantauan kualitas air. Kegiatan meliputi survei awal, pengembangan dan instalasi sistem, serta pelatihan pengoperasian dan pemeliharaan teknologi bagi para petani. Hasil menunjukkan bahwa sistem ini meningkatkan produktivitas kebun hidroponik dan mengurangi ketergantungan terhadap jaringan listrik nasional (PLN). Selain itu, proyek ini memberdayakan kelompok tani dengan pengetahuan tentang energi terbarukan dan teknologi pertanian modern, mendorong praktik pertanian yang berkelanjutan di lingkungan urban.
Kata kunci: energi baru terbarukan; hidroponik; monitoring kualitas air; penerapan teknologi; urban farming
Abstract:Corona virus (COVID-19) is an infectious disease caused by the SARS-CoV-2 virus. Since the spread of Covid-19, many government agencies in Indonesia have received the impact, including SMK Negeri 2 Tanjungbalai. The spread…
ad of the corona virus has resulted in this school no longer being able to carry out face-to-face learning starting from 2019 to 2022. To anticipate the spread of covid-19 in the SMKN 2 Tanjungbalai area, the community service team designed a security system at the school entrance to anticipate the spread of covid, so that if there are people or vehicles that want to enter the school will be sprayed automatically with disinfectant liquid, besides that the tool can also read the body temperature of visitors. This service uses the consultation and science and technology method, where the service team consults with the school principal about existing problems, namely to anticipate the spread of Covid-19 in the school area. or hands, then the temperature is set at 30 0C and do not water, while if the object does not have a fever, the temperature is in the range of 330C-360C and watering is carried out. Meanwhile for objects with a fever, the temperature is >= 370C and no watering is carried out, and they are not allowed to enter. All module voltages use the 5VDC input voltage, which is supplied from the controller. Meanwhile, the pump voltage uses a 12VDC inverter, which is reduced to 5.68 VDC.
Keywords: automatic disinfectant sprinkler; corona; ultrasonic sensor; microcontrollers
Abstrak: Virus corona (COVID-19) adalah penyakit menular yang disebabkan oleh virus SARS-CoV-2. Semenjak penyebaran covid-19 banyak instansi pemerintahan di indonesia yang mendapatkan imbasnya, diantaranya SMK Negeri 2 Tanjungbalai. Meluasnya virus corona mengakibatkan sekolah ini tidak lagi bisa melakukan pembalajaran tatap muka dimulai tahun 2019 sampai dengan 2022. Untuk mengantisipasinya penyebaran covid-19 diwilayah SMKN 2 Tanjungbalai ini, maka tim pengabdian merancang sistem pengaman dipintu masuk sekolah untuk mengantisipasi penyebaran covid, sehingga jika ada orang atau kendaraan yang ingin memasuki sekolah tersebut akan di semprot secara otomatis dengan cairan disinfektan, selain itu alat tersebut juga bisa membaca suhu tubuh pengunjung. Pada pengabdian ini menggunakan metode konsultasi dan ipteks, dimana tim pengabdian berkonsultasi dengan kepala Sekolah tentang masalah yang ada, yaitu untuk mengantisipasi penyebaran covid-19 di area sekolah.. Setelah dilakukan pengujian medapati bahwa Ada 3 kondisi pembacaan objek yaitu, ketika tidak ada objek, atau tangan, maka suhu diseting 30 0C tidak melakukan penyiraman, sementara jika objek tidak demam, suhu di range 330C-360C dan dilakukan penyiraman. Sementara untuk objek yang demam, maka suhu >= 370C dan tidak dilakukan penyiraman, serta tidak diperbolehkan masuk. Seluruh tegangan modul, menggunakan tegangan input 5VDC, yang disupply dari controller. Sementara untuk tegangan pompa menggunakan inverter 12VDC, yang dikecilkan menjadi 5,68 VDC.
Kata kunci : microcontroller; penyiram disinfektan otomatis; sensor ultrasonic; virus corona.
Abstract:Abstract: Has been Community Service for Micro-Business White Oyster Mushroom "Temperature control and humidity, Lower Fortress, Deli Serdang. Temperature control and humidity of white oyster mushrooms using Ardurino Uno…
R-3-based DHT 11 temperature sensor with 16x2 LCD display and HP Android. Controlling the temperature and humidity of white oyster mushrooms work automatically to help the mushroom farmers in controlling the temperature and humidity of white oyster mushroom kumbung .. If temperature> 300C and humidity <650C sensors will read the temperature and humidity in the kumbung and regulate the movement of the water pump in automatic and turn the water nozzle in water spraying onto the kumbung section and baglog mushrooms. This tool works to help white oyster mushroom farmers in increasing their harvest production.
Keywords: Temperature Control and Humidity, Website
Abstrak: Telah dilakukan Pengabdian Masyarakat bagi Usaha Mikro Jamur Tiram Putihâ€Pengendalian suhu dan kelembaban, Benteng Hilir, Deli Serdang. Pengendalian suhu dan kelembaban jamur tiram putih menggunakan sensor suhu DHT 11 berbasis Ardurino Uno R-3 dengan tampilan LCD 16x2 dan HP Android. Pengontrolan suhu dan kelembaban kumbung jamur tiram putih bekerja secara otomatis membantu para petani jamur dalam mengendalikan suhu dan kelembaban kumbung jamur tiram putih.. Jika suhu > 300C dan kelembaban <650C sensor akan membaca suhu dan kelembaban yang berada di kumbung dan mengatur pergerakkan pompa air secara otomatis dan menghidupkan nozzle air dalam penyemprotan air ke bahagian kumbung dan baglog jamur. Alat ini bekerja untuk membantu petani jamur tiram putih dalam peningkatan produksi panennya.
Kata Kunci : Pengendalian Suhu dan kelembaban, Website
Abstract:Abstract: Conventional water reservoir filling systems often cause inefficiencies due to delays in monitoring or failure of the float system which results in overflowing water from the reservoir. this research aims to develop…
velop an ESP32-based water level monitoring and control system by utilising IoT technology and ultrasonic sensors, this system can facilitate users in monitoring water levels and automating pump control. this research uses the experimental method, starting from system design to system testing and analysis, as well as testing which includes sensor accuracy, system response, and communication stability with the IoT server. based on the results obtained. The test results show that the system has an average accuracy rate of 98.4% with an average response time of 1.8 seconds. based on the results obtained, this system shows a positive accuracy value and response time in its application.
Keywords: blynk; internet of things; monitoring; water level
Abstrak: Sistem pengisian tandon air secara konvensional sering kali menimbulkan ketidakefisienan karena keterlambatan dalam pemantauan atau kegagalan sistem pelampung yang mengakibatkan meluapnya air dari tandon. penelitian ini bertujuan untuk mengembangkan sistem monitoring dan kontrol ketinggian air berbasis ESP32 dengan memanfaatkan teknologi IoT dan sensor ultrasonik, sistem ini dapat memudahkan pengguna dalam memonitoring ketinggian air dan mengotomatisasi kontrol pompa. Penelitian ini menggunakan metode eksperimen, mulai dari perancangan sistem hingga pengujian dan analisis sistem, serta pengujian yang meliputi akurasi sensor, respon sistem, dan kestabilan komunikasi dengan server IoT. Hasil pengujian menunjukkan bahwa sistem memiliki tingkat akurasi rata-rata sebesar 98,4% dengan waktu respon rata-rata 1,8 detik. berdasarkan hasil yang diperoleh, sistem ini menunjukkan nilai akurasi dan waktu respon yang positif dalam pengaplikasiannya.
Kata kunci: blynk; internet of things; pemantauan; tingkat air
Abstract:Abstract: Water irrigation is a crucial aspect of agriculture that often becomes the primary concern for farmers, especially because suboptimal management can lead to decreased crop yields and reduced income. So far, farmers…
mers have been practicing irrigation manually, where plants are watered twice a day, in the morning and evening, based on weather conditions without considering soil temperature or moisture levels. Based on the observations conducted, it was found that excessive water application increases water accumulation, resulting in nutrient loss from the soil and even root diseases. The objective of this study is to develop a system utilizing an ESP32 microcontroller and sensors to detect soil moisture, with a machine learning-based K-Nearest Neighbor (KNN) model, enabling farmers to remotely monitor and control their crops using an Android device. The testing results showed that with input data of 32°C temperature, 40% soil moisture, and 60% air humidity, the system produced a nearest distance of 0.000 and 0.541 from the closest k-nearest neighbors, with a status label of "needs water." As a result, the relay activates the water pump to irrigate the field. Meanwhile, for data with a nearest distance of 0.897, the system identified the status as "does not need water," indicating that the soil remains wet or moist. This study is expected to help reduce farmers' workloads by optimizing water usage according to plant needs and improving crop quality and yield.
Keywords: k-nearest neighbor (KNN); mikrokontroller ESP32; machine learning; water irrigation
Abstrak: Irigasi air merupakan aspek penting dalam pertanian yang menjadi perhatian utama petani, terutama karena pengelolaan yang kurang optimal berdampak pada penurunan hasil panen dan pendapatan. Selama ini, praktik irigasi oleh petani dilakukan secara manual, di mana penyiraman tanaman dilakukan dua kali sehari pada pagi dan sore berdasarkan kondisi cuaca tanpa memperhatikan suhu atau kelembaban tanah. Berdasarkan hasil observasi yang dilakukan, ditemukan masalah yaitu pemberian air secara berlebih menyebabkan akumulasi air meningkat mengakibatkan kehilangan nutrisi tanah dan bahkan penyakit akar. Tujuan penelitian ini menciptakan sistem yang dirancang menggunakan mikrokontroler ESP32 dan sensor untuk mendeteksi kelembaban tanah, dengan model K-Nearest Neighbor (KNN) berbasis machine learning sehingga memudahkan petani untuk mengontrol tanaman mereka dari jarak jauh menggunakan android. Hasil pengujian yang dilakukan dengan data inputan berupa suhu 32°C, kelembaban tanah 40% dan kelembaban udara 60%, sistem menghasilkan jarak terdekat sebesar 0.000 dan 0.541 dari k-nearest terdekat dengan label status "butuh air". Maka relay akan mengaktifkan pompa air untuk mengairi lahan. Kemudian, pada data dengan jarak terdekat 0.897, sistem mengidentifikasi status "tidak butuh air", menunjukkan bahwa kondisi tanah masih basah atau lembab. Penelitian ini diharapkan dapat membantu meringankan beban kerja petani mengoptimalkan penggunaan air sesuai dengan kebutuhan tanaman dan meningkatkan kualitas hasil panen.
Kata kunci: irigasi air; k-nearest neighbor (KNN); mikrokontroller ESP32; machine learning